49130-4A000 Drive Shaft Center Support Bearing

49130-4A000 Drive Shaft Center Support Bearing

OE: 49130-4A000

Interchange Part number: MR165252, ADG08030

Height : 59.5mm

Inner Diameter : 30mm

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

HYUNDAI H-1 / STAREX MPV (A1) 2.4 1997-2004

HYUNDAI H-1 / STAREX MPV (A1) 2.5 CRDi 2002-

HYUNDAI H-1 / STAREX MPV (A1) 2.5 CRDi 2006-2007

HYUNDAI H-1 / STAREX MPV (A1) 2.5 Tci 1997-2007

HYUNDAI H-1 / STAREX MPV (A1) 2.5 Tci 2004-2007

HYUNDAI H-1 / STAREX MPV (A1) 2.6 TdiC 1997-2004

HYUNDAI H-1 Box (A1) 2.4 2000-2004

HYUNDAI H-1 Box (A1) 2.5 CRDi 2003-2007

HYUNDAI H-1 Box (A1) 2.5 TD 2000-2000

HYUNDAI H-1 Box (A1) 2.5 TD 2000-2006

Due to the split structure, when users install or replace bearings and seals, they need to open the upper cover to completely expose the entire cavity. Without protection, external abrasive particles can easily enter. In addition, if the inside of the cavity itself has been contaminated by abrasive particles, it is difficult to clean thoroughly when replacing the bearing. The seal faces the external dust, abrasive particles, or even broken stones. Without any protection measures on the outside of the seal, the dust and abrasive particles are easily in contact with the seal. Once the dust and abrasive particles enter the seal, it may cause the seal to fail, which will affect the lubrication performance and cause the bearing to fail. The number of components is large, installation is time-consuming and laborious, and labor costs are increased.