Drive Shaft Center Support Bearing For Ford LN8000

Drive Shaft Center Support Bearing For Ford LN8000

Drive shaft center support bearing for Ford OE: B9TZ4840, F5TZ4800A, 362145 Interchange Part number: 170053, 1700936, HB88107 Size: BORE_INCH: 1.378 BORE_MM: 35 OD_INCH: 2.8346 OD_MM: 72 WID_INCH: 6.624 WID_MM: 168.25 Quality: High level Warranty: 12 Months Certificate: ISO/TS16949 Place of...

Drive shaft center support bearing for Ford

OE: B9TZ4840, F5TZ4800A, 362145

Interchange Part number: 170053, 1700936, HB88107

Size: BORE_INCH: 1.378

BORE_MM: 35

OD_INCH: 2.8346

OD_MM: 72

WID_INCH: 6.624

WID_MM: 168.25

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

Ford  F-250     1997

Ford  E-150     1992

Ford  LN8000   1997

CHEVROLET K2500 SUBURBAN   1998

 

The rigidity of the bearing refers to the amount of force required to produce a unit deformation of the bearing. The elastic deformation of rolling bearings is very small and can be ignored in most machines. However, in some machines, such as machine tool spindles, bearing rigidity is an important factor. Cylindrical and tapered roller bearings are generally used. Because these two types of bearings are subjected to load, their rolling elements and raceways are in point contact and have poor rigidity.

 

In addition, various types of bearings can also be pre-tensioned to achieve the purpose of increasing the rigidity of the support. For example, angular contact ball bearings and tapered roller bearings, in order to prevent the vibration of the shaft and increase the rigidity of the support, a certain axial force is often applied at the time of installation to press them against each other. The amount of pre-tightening should not be too large. When it is too large, the bearing friction will increase, the temperature rise will increase, and the bearing life will be affected.

 

Drive shaft center support bearing for Ford LN8000