Interchange Part number: DAC42800036/34-2RZ
Height : 36 mm
Outer Diameter : 80 mm
Inner Diameter : 42 mm
Quality: High level
Warranty: 12 Months
Place of Origin: China (mainland)
HYUNDAI COUPE (GK) 2001/01-2009/11
HYUNDAI XG (XG) 1998/12-2005/12
When inspecting tapered roller bearings, never expose the bearings to contaminants or moisture. If work is interrupted, the machine should be covered with greased plastic sheet or similar material.
If the unshielded bearing is to be cleaned without disassembly and inspection is possible, it should be cleaned with white spirit with a coating brush, and then wiped dry with a lint-free cloth or compressed air (Be careful not to start the bearing assembly to rotate).
Do not clean bearings with sealed caps or dust; just wipe their outer surfaces. If tapered roller bearings are damaged, they need to be replaced. It is far more economical to replace the bearings during the period of regular downtime maintenance than the loss of sudden downtime due to damage to the bearing.
1. In order to ensure the dynamic balance of the tapered roller bearing, it should always pay attention to whether the balance pad is de-soldering. The new drive shaft assembly is provided as a set. When installing the new drive shaft, pay attention to the assembly mark of the telescopic sleeve, and ensure that the flange fork is in a plane. When repairing and disassembling the drive shaft, the assembly mark should be printed on the telescopic sleeve and the flange shaft in order to maintain the original assembly relationship when reassembling.
2. It is strictly prohibited for cars to start at high speed.
3. It is strictly forbidden to lift the clutch pedal.