511035 Bearing

511035 Bearing

The bearings are running in a lean state, and it is easy to form adhesive wear, which deteriorates the state of the working surface.

511035 bearing

OE: 511035

Interchange Part number: DAC37740045-2RS

Fitting Position : Rear Axle

Fitting Position : Left

Fitting Position : Right

Inner Diameter : 37mm

Outer diameter : 74mm

Width : 45mm

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

 

Application:

OPEL  CALIBRA A (C89) 2.0 i (M07)                             1989-1996

OPEL  CALIBRA A (C89) 2.0 i 16V (M07)                         1990-1994

OPEL  CALIBRA A (C89) 2.0 i 16V (M07)                         1994-1997

OPEL  CALIBRA A (C89) 2.0 i 16V 4x4 (M07)                     1990-1994

OPEL  CALIBRA A (C89) 2.0 i 16V 4x4 (M07)                     1994-1997

OPEL  CALIBRA A (C89) 2.0 i 4x4 (M07)                         1990-1997

OPEL  CALIBRA A (C89) 2.0 i Turbo 4x4 (M07)                    1991-1997

OPEL  CALIBRA A (C89) 2.5 i V6 (M07)                          1993-1997

OPEL  OMEGA A (V87) 2.3 TD (F19, M19, N19)                   1986-1988

OPEL  OMEGA A (V87) 2.3 TD Interc. (F19, M19, N19)             1988-1994

 

Guarantee longer bearing cage life-common factors for bearing cage fracture:

1. Poor bearing lubrication

The bearings are running in a lean state, and it is easy to form adhesive wear, which deteriorates the state of the working surface. The tears caused by adhesive wear easily enter the cage, causing the cage to generate an abnormal load, which may cause the cage to break.

2. Bearing creep phenomenon

The creep phenomenon of multi-finger ferrule, when the interference of the mating surface is insufficient, the load point moves to the surrounding direction due to sliding, resulting in the phenomenon that the ferrule moves relative to the shaft or the shell in a circumferential direction.

3. Abnormal load of bearing cage

Insufficient installation, tilt, excessive interference, etc. can easily cause clearance reduction, exacerbate friction and heat, soften the surface, and abnormal peeling occurs prematurely. As the peeling expands, peeling foreign objects enter the pockets of the cage, leading to the cage The operation is retarded and additional load is generated, which aggravates the wear of the cage. Such deterioration of the cycle may cause the cage to break.

511035 bearing