VKBA3540 Wheel Bearing Kit For Fiat Bravo

VKBA3540 Wheel Bearing Kit For FIAT BRAVO ALFA ROMEO 145 (930) 1994/07-2001/01 ALFA ROMEO 146 (930) 1994/12-2001/01 FIAT BARCHETTA (183) 1995/03-2005/05 FIAT BRAVA (182) 1995/10-2003/06 FIAT BRAVO I (182) 1995/10-2001/10 FIAT BRAVO II (198) 2006/11- FIAT FIORINO Box Body / Estate (225_) 2007/01-...

VKBA3540 Wheel Bearing Kit For FIAT BRAVO


ALFA ROMEO 145 (930) 1994/07-2001/01


ALFA ROMEO 146 (930) 1994/12-2001/01


FIAT BARCHETTA (183) 1995/03-2005/05

FIAT BRAVA (182) 1995/10-2003/06


FIAT BRAVO I (182) 1995/10-2001/10


FIAT BRAVO II (198) 2006/11-


FIAT FIORINO Box Body / Estate (225_) 2007/01-


FIAT MAREA Weekend (185) 1996/09-2007/12


FIAT MULTIPLA (186) 1999/04-2010/06


FIAT PALIO (178_) 1996/04-


FIAT PALIO Weekend (178_) 1996/04-


FIAT PANDA (169) 2003/09-


FIAT PUNTO (188_) 1999/09-2012/07


FIAT PUNTO Van (188_) 2000/02-2009/10


FIAT SIENA (178_, 172_) 1996/04-2012/12


FIAT STILO (192) 2001/10-2010/11


LANCIA LYBRA (839_) 1999/07-2005/10


LANCIA LYBRA SW (839_) 1999/07-2005/10


LANCIA MUSA (350_) 2004/10-2012/09


LANCIA Y (840_) 1995/11-2003/09


LANCIA YPSILON (843) 2003/10-2011/12


Common abnormal noise problem

When one of the four wheel bearings of the vehicle is damaged, you will hear a continuous humming sound in the car while driving. This sound cant tell where it came from, and it feels like the whole car is inside. It is full of such snoring, and the faster the speed, the louder the sound. The following is the judgment method:

Method 1: Open the window to hear if the sound comes from outside the car;

Method 2: After increasing the speed (when the noise is loud), the gear position is in the neutral position to let the vehicle slide, and observe whether the noise comes from the engine. If the noise does not change when the neutral gear slides, most of the wheel bearings have problems;

Method 3: Temporarily stop, get off and check if the temperature of the axle is normal. The method is: touch the four hubs by hand and feel the temperature is consistent. (When the brake shoes and the gap are normal, the temperature of the front and rear wheels is If there is a gap, the front wheel should be high. If you feel that the difference is not big, you can continue to drive slowly to the repair station;

Method 4: Raise the car with a lift (previously release the handbrake and hang the neutral). When there is no lift, the jack can be used to raise the wheel one by one. The manpower will rotate the four wheels quickly. When the problematic axle is encountered, it will be issued. The sound is completely different from other axles. It is easy to tell which axle has a problem with this method.

If there is severe damage to the hub bearing, there are cracks, pitting or ablation on it and must be replaced. Apply grease before loading new bearings, and then install them in reverse order. The replaced bearings must be flexible and free of miscellaneous and vibration.