Auto Parts Rear Wheel Hub Bearing Kits 9803736180 Fit For PEUGEOT

Auto Parts Rear Wheel Hub Bearing Kits 9803736180 Fit For PEUGEOT

Auto parts Rear Wheel Hub Bearing kits 9803736180 fit for PEUGEOT OE:9803736180, 9820098380 Interchange Part number: 713650650, 602208 Size: Rim: 5 -Hole Flange Ø: 130 mm Quality: High level Warranty: 12 Months Certificate: ISO/TS16949 Place of Origin: China (mainland) Application: PEUGEOT 308...

Auto parts Rear Wheel Hub Bearing kits 9803736180 fit for PEUGEOT

OE:9803736180, 9820098380

Interchange Part number: 713650650, 602208

Size: Rim: 5 -Hole

Flange Ø: 130 mm

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

PEUGEOT 308 II 1.2 THP 110 2013-

PEUGEOT 308 II 1.2 THP 130 2013-

PEUGEOT 308 II 1.2 VTi 72 2013-

PEUGEOT 308 SW II 1.6 VTi 2014-


Check the wheel bearing nut and make sure it is tight. The method is to grab the top and bottom of the tire and shake the wheel in and out. You should not feel a noticeable swing. If you feel a little loose or not, or if the vehicle has been driven for 50,000 kilometers and has not been greased for bearing cleaning, it should be taken apart. The bearing nut is fixed by the split pin and should be removed to be discarded and replaced with a new split pin. If the car bearing is fixed with a special lock nut, use a punch to release it from the groove of the axle. When reassembling, it is better to use a new nut. Use a sleeve wrench to unscrew the nut and shake the wheel to remove the retaining ring and outer bearing.


01(001)

02(001)

03(001)

04(001)