Front Axle Wheel Bearing Kit For PEUGEOT C4 VKBA3683

Front Axle Wheel Bearing Kit For PEUGEOT C4 VKBA3683

Wheel Bearing Kit For PEUGEOT Front Axle VKBA3683 OE: 3350.8, 16 077 041 8 Interchange Part number: 713 6405 0, 60167, R159.4 Size: Width: 44 mm Inner Diameter: 45 mm Outer diameter: 83 mm Quality: High level Warranty: 12 Months Certificate: ISO/TS16949 Place of Origin: China (mainland)...

Wheel Bearing Kit For PEUGEOT Front Axle VKBA3683

OE: 3350.8, 16 077 041 8

Interchange Part number: 713 6405 0, 60167, R159.4

Size: Width: 44 mm

Inner Diameter: 45 mm

Outer diameter: 83 mm

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

PEUGEOT 407 (6D_) 1.8 2004-

PEUGEOT 407 (6D_) 1.8 16V 2005-

PEUGEOT 407 (6D_) 2.0 2004-

PEUGEOT 407 (6D_) 2.0 16V 2005-

CITROEN C4 II (B7) 1.2 THP 110 2015-

Hangzhou Duhui Automotive Parts Co., Ltd. is located at national-level Xiaoshan Economic Development Zone which is the most important production base of wheel bearings in China. Duhui is a professional manufacturer and supplier of wheel bearings, and we focus on developing all kinds of wheel bearing kits.

Angular contact ball bearings

It can bear radial load and axial load at the same time, the rotation speed is higher, the contact angle is larger, and the axial load capacity is higher.

Single row bearings can only withstand axial loads in one direction and will cause additional axial forces when subjected to radial loads. And can only limit the axial displacement of the shaft or housing in one direction. If it is installed in pairs, the outer rings of a pair of bearings are opposite, that is, the wide end faces the wide end faces, and the narrow end faces the narrow end faces. This avoids causing additional axial forces and limits the shaft or housing to axial play in both directions. There are more than 70 variants of angular contact ball bearings.

2.1 The nominal contact angle is 15°, 25°, 40°. The larger the contact angle, the higher the axial load capacity. High-precision and high-speed bearings usually take a 15° contact angle, and the contact angle increases under axial force.

2.2 Generally, the inner ring or outer ring has a locking port, and the inner and outer rings are not separable. After the outer ring is heated and expanded, it is assembled with the inner ring, the rolling elements, and the cage assembly. The number of ball loading is larger than that of deep groove ball bearings. The rated load is the largest in the ball bearing, the rigidity is strong, and the operation is stable.