Auto Parts Wheel Hub Bearing M113301210 Fit For CHERY

Auto Parts Wheel Hub Bearing M113301210 Fit For CHERY

Auto parts wheel hub bearing M113301210 fit for CHERY OE:M113301210 Fitting Position: Rear Axle Outer diameter: 137 mm Height: 66 mm Inner Diameter: 32 mm Num. of holes: 5 Number of splines on input shaft: 48 Weight: 2.235 kg Braking / Drive Dynamics: for vehicles with ABS Quality: High level...

Auto parts wheel hub bearing M113301210 fit for CHERY

OE:M113301210

Fitting Position: Rear Axle

Outer diameter: 137 mm

Height: 66 mm

Inner Diameter: 32 mm

Num. of holes: 5

Number of splines on input shaft: 48

Weight: 2.235 kg

Braking / Drive Dynamics: for vehicles with ABS

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

CHERY A3 Saloon 1.6 2010-2014

CHERY A3 Saloon 1.6 2008-2010


Porous metal material


This is a bearing material obtained by pressing and sintering different metal powders. This material is porous and accounts for about 10% to 35% of the volume. The bearing is immersed in hot oil for several hours before use to fill the pores with lubricating oil. Therefore, the bearing made of this material is usually called an oil bearing.


It is self-lubricating. During operation, due to the suction effect of the journal rotation and the expansion of the oil during the heating of the bearing, the oil enters the friction surface to provide lubrication; when not working, the oil is sucked back into the bearing due to capillary action, so For a long time, it works well even without adding lubricating oil. If oil is supplied regularly, the effect is better. However, due to its low toughness, it is suitable for smooth and non-impact loads and low to medium speeds. Porous iron and porous bronze are commonly used. Porous iron is commonly used to make mill bushings, machine oil pump bushings, internal combustion engine camshaft bushings, etc.


01(001)

02(001)

03(001)

04(001)