New Auto Rear Wheel Hub Bearing Assembly A11-3301030BB For CHERY

New Auto Rear Wheel Hub Bearing Assembly A11-3301030BB For CHERY

New Auto Rear Wheel Hub Bearing Assembly A11-3301030BB for CHERY OE:A11-3301030BB Interchange Part number: 1582-A15R Size: Outer diameter: 120 mm Rim: 4 -Hole Thread Size: M12×1.5 Inner Diameter: 30 mm Mounting Bores Distance: 100 mm Quality: High level Warranty: 12 Months Certificate:...

New Auto Rear Wheel Hub Bearing Assembly A11-3301030BB for CHERY

OE:A11-3301030BB

Interchange Part number: 1582-A15R

Size: Outer diameter: 120 mm

Rim: 4 -Hole

Thread Size: M12×1.5

Inner Diameter: 30 mm

Mounting Bores Distance: 100 mm

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

CHERY  COWIN 1.3  2006-2010

CHERY  COWIN 1.5  2008-2010

CHERY  COWIN 1.6  2003-2010


The load that the bearing can withstand is not dependent on the fatigue of the material, but on the extent of the permanent deformation caused by the load on the raceway.


The load acting on the stationary or slowly reciprocating oscillating bearing, as well as the impact load acting on the rotating bearing, may cause partial positions of the rolling elements to be flattened and an indentation formed on the raceway. The indentations may be irregularly distributed on the raceway or may be evenly distributed corresponding to the distance between the rolling bodies. If the load acts on the bearing, after the bearing rotates to a certain number of turns, the deformation will be evenly distributed over the entire raceway, and the bearing will be permanently deformed, which may cause adverse effects such as vibration, noise, etc. of the bearing. This can result in increased clearance of the bearing or affect the fit of the shaft or bearing chamber.


01(001)

02(001)

03(001)

04(001)