BMW 5 Front Wheel Hub Assembly

Wheel bearings are sensitive and in any case require the right method and the right tool. The components of the bearing must not be damaged during storage and installation. Some bearings require a large pressure to press in, so special tools are required. Be sure to refer to the car manufacturer's instructions.

Wheel bearings are sensitive and in any case require the right method and the right tool. The components of the bearing must not be damaged during storage and installation. Some bearings require a large pressure to press in, so special tools are required. Be sure to refer to the car manufacturer's instructions.


When installing the bearing, it should be in a clean and tidy environment, and the fine particles entering the bearing will also shorten the service life of the bearing. It is very important to maintain a clean environment when replacing bearings. It is not allowed to hit the bearing with a hammer, pay attention to the bearing not to fall to the ground (or similarly improper handling). The condition of the shaft and housing should also be checked before installation. Even minor wear can cause poor fit and cause early failure of the bearing.


For the hub bearing unit, do not attempt to disassemble the hub bearing or adjust the seal of the hub unit, otherwise the seal will be damaged and water or dust will enter. Even the raceways of the seal ring and the inner ring are damaged, resulting in permanent failure of the bearing.


Hangzhou Duhui Automotive Parts Co.,Ltd, a factory manufacture and export auto bearing, such as wheel bearing, wheel bearing kits, wheel hub, tensioner, timing belt kits, OAP, Hydraulic release bearing and so on to all around the world for more than 13 years.


Our Mission & Vision

With the customer in focus and in selected markets to develop, produce and distribute quality spare parts for the automotive after-market.

We wish to be known for our customer DUHUI provide the qualified auto parts in efficient way,and make everyone use our parts to drive safely.


Wheel Hub Wholesale for BMW5 6 VKBA3670


OE NO.: VKBA3670, R150.37, 713667070, 31226765601, 6765601, 31226765601S1, 5037, 27546


Front Vehicle


Application:

BMW 5 

BMW 5 Touring

BMW 6

BMW 6 Convertible


How To Place Your Order:

1. Send us your order list (models/ quantities/ colors).

2. You arrange payment after you confirmed proforma invoice, we will arrange production after received your payment notice.

3. We will arrange delivery after your payment arrived and goods ready, and at the same time we will tell you goods tracking number so that you could know your goods condition by this number from courier site.

4. You will receive your order in about 3-5 days after goods ship out.


01(001)

02(001)

03(001)

04(001)

Previous: Front Wheel Hub Assembly for BMW X5 X6 VKBA6619

Next: No Information