High Quality Car Front Wheel Bearing Hub 15918787 For BUICK

High quality car front wheel bearing hub 15918787 for BUICK

OE: 15918787, 15941790

Interchange Part number: 1411257974, HA590227, 513277

Bearing Style: Ball

Bolt Circle Diameter A: 5.1968 IN

Bolt Circle Diameter B: 4.75 IN

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

BUICK ENCLAVE BASE MODEL V6 3.6L 217CID VIN D LLT 2012

BUICK ENCLAVE CX V6 3.6L 217CID VIN 7 2008

BUICK ENCLAVE CX V6 3.6L 217CID VIN D LLT 2009-2011

BUICK ENCLAVE CXL V6 3.6L 217CID VIN 7 2008

BUICK ENCLAVE CXL V6 3.6L 217CID VIN D LLT 2009-2011

CHEVROLET TRAVERSE LS V6 3.6L 217CID VIN D LLT 2009-2012

CHEVROLET TRAVERSE LT V6 3.6L 217CID VIN D LLT 2009-2012

CHEVROLET TRAVERSE LTZ V6 3.6L 217CID VIN D LLT 2009-2012

GMC ACADIA DENALI V6 3.6L 217CID VIN D LLT 2011-2012

GMC ACADIA SL V6 3.6L 217CID VIN D LLT 2010-2012

GMC ACADIA SLE V6 3.6L 217CID VIN 7 2007-2008

GMC ACADIA SLE V6 3.6L 217CID VIN D LLT 2009-2012

GMC ACADIA SLT V6 3.6L 217CID VIN 7 2007-2008

GMC ACADIA SLT V6 3.6L 217CID VIN D LLT 2009-2012

SATURN OUTLOOK XE V6 3.6L 217CID VIN 7 2008

SATURN OUTLOOK XE V6 3.6L 217CID VIN D LLT 2009-2010

SATURN OUTLOOK XR V6 3.6L 217CID VIN 7 2008

SATURN OUTLOOK XR V6 3.6L 217CID VIN D LLT 2009-2010

Bearing travel and axial displacement Normally, a shaft is supported by a distance between two bearings. In order to adapt to the different degrees of thermal rise of the shaft and the outer casing, one bearing should be fixed in the axial direction during installation, and the other bearing can be moved on the shaft (ie, swimming support) to prevent the shaft from being elongated or contracted. The resulting jamming phenomenon. The floating support usually adopts cylindrical roller bearings (formerly 2000 and 32000) with inner or outer ring without ribs and needle bearings. This is mainly because the internal structure of such bearings allows proper axial displacement of the shaft and the outer casing. . At this time, the inner ring and the shaft, the outer ring and the outer casing hole can be tightly fitted. When using non-separable bearings for swimming support, such as deep groove ball bearings, spherical roller bearings, the outer ring and the outer casing hole must be allowed in the installation, or the inner ring and the shaft should be loosely fitted to make the axial direction Free to swim.