FORD FOCUS 2000-2009 Wheel Hub Assembly

The most common use of wheel bearings for vehicles in the past was the use of single row tapered roller or ball bearings in pairs. With the development of technology, car hub units have been widely used in cars.

Description

The FORD FOCUS 2000-2009 Wheel Hub Assembly is is manufactured making use of materials of high quality so that reliability, durability and optimum performance are guaranteed. It is the type of third generation. The most common use of wheel bearings for vehicles in the past was the use of single row tapered roller or ball bearings in pairs. With the development of technology, car hub units have been widely used in cars. The range and use of hub bearing units is increasing, and has now reached the third generation: the first generation consists of double row angular contact bearings. The second generation has a flange for fixing the bearing on the outer raceway, which can be simply fixed to the axle by a nut. Make the maintenance of the car easier. The third-generation hub bearing unit is matched with a bearing unit and an anti-brake brake system. The FORD FOCUS 2000-2009 Wheel Hub Assembly is designed with an inner flange and an outer flange, the inner flange is bolted to the drive shaft, and the outer flange mounts the entire bearing together.


Wheel Hub Assembly for FORD FOCUS 518510


Front Vehicle

Front Axle

Flange Diameter: 5.2 In.

Bolt Circle Diameter: 4.3 In.

Wheel Pilot Diameter: 2.5 In.

Brake Pilot Diameter: 2.5 In.

Hub Pilot Diameter: 2.8 In.

Bolt Quantity: 4

Bolt Hole qty: N/A

ABS Sensor: No

Number of Splines: 25


Application:

FORD FOCUS 2000-2009


01(001)

02(001)

03(001)

04(001)