Rear Wheel Hub Assembly for forD EXPLORER 521000

Because the front hub results in similar operating conditions for the failure of the bearings on both sides, it is recommended to replace them in pairs even if only one bearing is broken.

Description

Rear Wheel Hub Assembly for forD EXPLORER 521000 rides on a metal axle shaft and fits tightly inside the hub, which is a hollow chunk of metal at the center of the wheel. The hub holds the lug bolts that you use to bolt the tire onto the wheel. The wheel bearing is pressed into the hub from the back.

Rear Wheel Hub Assembly for forD EXPLORER 521000 are integral part of the car. They are designed to minimize firction when turning the wheels and make an important contribution to fuel savings and reduce CO2 emmisions. Because the front hub results in similar operating conditions for the failure of the bearings on both sides, it is recommended to replace them in pairs even if only one bearing is broken.

Wheel bearings are sensitive and in any case require the right method and the right tool. The components of the bearing must not be damaged during storage and installation. Some bearings require a large pressure to press in, so special tools are required. Be sure to refer to the car manufacturer's instructions.


Wheel Hub for FORD EXPLORER LINCOLN AVIATOR 521000

Rear Vehicle


Application:

FORD EXPLORER

FORD EXPLORER SPORT

LINCOLN AVIATOR

MERCURY MOUNTAINEER


Rear Axle

Flange Diameter: 6.3 In.

Bolt Circle Diameter: 4.5 In.

Wheel Pilot Diameter: 2.8 In.

Brake Pilot Diameter: 3.3 In.

Hub Pilot Diameter: 3.4 In.

Bolt Quantity: 5

Bolt Hole qty: N/A

ABS Sensor: No

Number of Splines: 29


01(001)

02(001)

03(001)

04(001)