Wheel Hub Assembly for forD MUSTANG 1994-2004

In order to ensure maximum safety and reliability, it is recommended that you always check the hub bearing regardless of the length of the car – pay attention to whether the bearing has early warning signs of wear: including any friction noise during rotation or suspension of the combined wheel in the turn When the speed is not normal.

Description:

Wheel Hub Assembly for forD MUSTANG 1994-2004 has special coatings which will prevent corrosion of the system and this will go a long way in ensuring durability. There is also a specially designed seal which protects the system from contamination. In order to ensure maximum safety and reliability, it is recommended that you always check the hub bearing regardless of the length of the car – pay attention to whether the bearing has early warning signs of wear: including any friction noise during rotation or suspension of the combined wheel in the turn When the speed is not normal.

For rear-wheel-drive vehicles, it is recommended that the vehicle travels to 38,000 km to deal with the lubrication of the front hub bearings. When replacing the brake system, check the bearings and replace the oil seal. If you hear the noise from the bearing parts of the hub, first of all, it is important to find the location where the noise occurs. There are many moving parts that may produce noise, or some rotating parts may come into contact with the non-rotating parts. If it is confirmed that the noise is in the bearing, the bearing may be damaged and needs to be replaced.

In addition, the Wheel Hub Assembly for forD MUSTANG 1994-2004 has premium seals which are designed to assist in the prevention of damage during installation. The seals also provide improved protection so that the bearing life can be extended while enhanced durability will be achieved.


Wheel Bearing Hub for FORD MUSTANG 513115 FRONT


Front Vehicle

Flange Diameter: 5.47 In.

Bolt Circle Diameter: 4.50 In.

Wheel Pilot Diameter: 2.78 In.

Brake Pilot Diameter: 2.80 In.

Flange Offset: 1.87 In.

Hub Pilot Diameter: 3.15 In.

Bolt Size: 1/220

Bolt Quantity: 5

Bolt Hole qty: N/A

ABS Sensor: Has ABS with Tone Ring Sensor

Number of Splines: N/A


Application:

FORD MUSTANG 1994-2004


01(001)

02(001)

03(001)

04(001)