Wheel hub bearing assembly 515076 fit for FORD
Interchange Part number: 715076, HA590132, 515076
Flange Diameter: 8 In.
Bolt Circle Diameter: 6.7 In.
Wheel Pilot Diameter: 4.9 In.
Brake Pilot Diameter: 5.1 In.
Flange Offset: 1.7 In.
Hub Pilot Diameter: 4.5 In.
Hub Bolt Circle Diameter: 5.5 In.
Bolt Quantity: 8
Bolt Hole qty: 4
Quality: High level
Warranty: 12 Months
Place of Origin: China (mainland)
Ford F-250 Super Duty 1999 4WD, 2-Wheel ABS, To Mar 21/1999, Single Rear Wheels
Ford F-350 Super Duty 1999- 4WD, 2-Wheel ABS, To Mar 21/1999, Single Rear Wheels
Bearings are precision parts, so they require a very cautious attitude when using them. That is, they use high-performance bearings. If they are used improperly, they can not achieve the expected performance and easily damage the bearings. Therefore, the following matters should be noted when using bearings:
Therefore, in calculating the bearing size, the term "life" must be more clearly defined. All information on the basic dynamic load ratings that are generally provided is based on a sufficiently large number of identically identical bearings, 90% of which can be exceeded.
Different defined bearing life. One of them is “working life”, which means the actual life of the bearing before it fails under actual working conditions. It must be noted that the life of individual bearings can only be predicted by statistical methods. Lifetime calculations are only about 90% of the bearing population and the reliability of certain procedures. Failures that occur during actual use are usually not caused by fatigue, and more often due to contamination, wear, misalignment, corrosion, or failures caused by cages, lubricants or seals.