New Auto Rear Wheel Hub Bearing Assembly 42200T0A951 for CR-V
Interchange Part number: 912708
Fitting Position: Rear Axle
Numb.of teeth,ABS ring: 96
Outer diameter: 152 mm
Rim: 5 -Hole
Thread Size: M12×1.5
Number of splines on input shaft: 23
Supplementary Article/Info 2: with integrated ABS sensor
Mounting Bores Distance: 114.3 mm
Quality: High level
Warranty: 12 Months
Place of Origin: China (mainland)
HONDA CR-V IV (RM_) 2.2 i-DTEC AWD (RE6) 2012-
The size, direction and nature of the load on the bearing are the main basis for selecting the type of bearing.
When selecting the type of bearing according to the size of the load, since the main components in the roller bearing are in line contact, it is suitable for receiving a large load and the deformation after the bearing is small. Ball bearings are point contacts and should be used to withstand light or medium loads, so ball bearings should be preferred when the load is small.
When selecting the bearing type according to the direction of the load, thrust bearings are generally used for pure axial loads. Thrust ball bearings are available for smaller pure axial loads; thrust roller bearings are available for larger pure axial loads. For pure radial loads, deep groove ball bearings, cylindrical roller bearings or needle bearings are generally used. When the bearing is subjected to the radial load R and there is a small axial load A, a deep groove ball bearing or an angular contact ball bearing or a tapered roller bearing with a small contact angle may be selected; when the axial load is large In the case of an angular contact ball bearing or a tapered roller bearing with a large contact angle, or a combination of a radial bearing and a thrust bearing, a radial load and an axial load are respectively employed.