Wheel Hub Assembly Rear for HONDA CIVIC 512257

In order to judge whether the removed bearing can be reused, it is important to check its dimensional accuracy, rotation accuracy, internal clearance, mating surface, raceway surface, cage and seal. Large bearings cannot be rotated by hand.

Car Hub Unit Wheel Hub for HONDA CIVIC 512257


Flange Diameter: 5.492 In.

Bolt Circle Diameter: 4.500 In.

Wheel Pilot Diameter: 2.52 In.

Brake Pilot Diameter: 2.520 In.

Flange Offset: 2.169 In.

Hub Pilot Diameter: 2.756 In.

Hub Bolt Circle Diameter: 3.397 In.

Bolt Size: M12X1.5

Bolt Quantity: 5

Bolt Hole MET: M10X1.25

Bolt Hole qty: 4

ABS Sensor: Y

Rear Vehicle


Application:

HONDA CIVIC DX

HONDA CIVIC GX

HONDA CIVIC LX


Inspection And Judgment

In order to judge whether the removed bearing can be reused, it is important to check its dimensional accuracy, rotation accuracy, internal clearance, mating surface, raceway surface, cage and seal. Large bearings cannot be rotated by hand. Pay attention to the appearance of rolling elements, raceways, cages, and ribs. The higher the importance of bearings, the more careful inspection is required.


Causes of rolling bearing heating and its elimination.

Bearing accuracy is low: bearings with specified accuracy grades are selected.

The spindle is bent or the hole in the case is not the same: repair the spindle or the case.

Poor lubrication: Use the specified grade of lubricant and clean it properly.

Low assembly quality: improved assembly quality.

Bearing inner casing running ring: replace the bearing and related wear parts.

The axial force is too large: cleaning and adjusting the gap of the sealing ring is required to be between 0.2 and 0.3 mm, correcting the balance hole diameter of the impeller and verifying the static balance value.

Bearing damage: Replace the bearing.


01(001)

02(001)

03(001)

04(001)