JEEP WRANGLER Front Wheel Hub Assembly 1999-2006

The main cause of bearing fracture failure is defect and overload. When the applied load exceeds the material strength limit and the part is broken, it is called overload fracture. The main reason for the overload is the sudden failure of the host or improper installation.

Description

The JEEP WRANGLER Front Wheel Hub Assembly 1999-2006 is one of the key components of the car. Its main function is to carry the weight and provide precise guidance for the rotation of the hub, which requires it to withstand both axial and radial loads. It is mainly composed of a hub brake hub connecting the inner and outer rings of the screw nut bearing, and is an important component of the automobile axle. Therefore, in order to ensure the accuracy of the product, the burr corrosion on each component must be removed and cleaned before assembly, so that the joint surface of each component is smooth and flat before assembly. Our JEEP WRANGLER Front Wheel Hub Assembly 1999-2006 is suitable for JEEP WRANGLER.


Fracture Failure

The main cause of bearing fracture failure is defect and overload. When the applied load exceeds the material strength limit and the part is broken, it is called overload fracture. The main reason for the overload is the sudden failure of the host or improper installation. Defects such as microcracks, shrinkage cavities, air bubbles, large foreign objects, overheated tissue and localized burns of the bearing parts also cause breakage at the defects during impact overload or severe vibration, called defect fracture. It should be pointed out that in the manufacturing process, the quality of the raw materials in the re-inspection, forging and heat treatment, and the control of the processing process can be correctly analyzed by the instrument to determine whether the above defects exist, and the control must be strengthened in the future. However, in general, the most common bearing failure failures are overload failures.


Wheel Hub for JEEP WRANGLER CHEROKEE 513158


Front Vehicle

Flange Diameter: 6.040 In.

Bolt Circle Diameter: 4.500 In.

Wheel Pilot Diameter: 2.812 In.

Brake Pilot Diameter: 2.830 In.

Flange Offset: 1.905 In.

Hub Pilot Diameter: 3.942 In.

Hub Bolt Circle Diameter: 4.750 In.

Bolt Size: 1/2-20

Bolt Quantity: 5

Bolt Hole MET: M12X1.75

Bolt Hole qty: 3

Flange Shape: TRIANGULAR

ABS Sensor: No

Number of Splines: 27


Application:

JEEP CHEROKEE 1999-2001

JEEP WRANGLER 2000-2006


01(001)

02(001)

03(001)

04(001)