Auto Parts Front Wheel Bearings And Hub Assembly 512452 Fit For MAZDA

Auto Parts Front Wheel Bearings And Hub Assembly 512452 Fit For MAZDA

Auto parts front Wheel Bearings and Hub Assembly 512452 fit for MAZDA OE: L2062615XA Interchange Part number: HA590041, BR930787 Fitting Position: Rear Axle Fitting Position: Left Fitting Position: Right Quality: High level Warranty: 12 Months Certificate: ISO/TS16949 Place of Origin: China...

Auto parts front Wheel Bearings and Hub Assembly 512452 fit for MAZDA

OE: L2062615XA

Interchange Part number: HA590041, BR930787

Fitting Position: Rear Axle

Fitting Position: Left

Fitting Position: Right

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)


Application:

MAZDA CX-9 (TB) 3.5 2006-2007

MAZDA CX-9 (TB) 3.7 2007-



Usually, the shaft is supported by two bearings in the radial direction and the axial direction. The bearing on one side is called a fixed end bearing. It bears both radial and axial loads and acts as a relative between the fixed shaft and the bearing housing. The role of axial displacement. The other side is called the free end, only the radial load is applied, and the axial direction can be relatively moved.

Fixed-end bearings must be fixed to both the shaft and the bearing housing. Suitable bearings are bearings that can withstand composite loads, such as deep groove ball bearings, spherical roller bearings, and double or mating angular contact ball bearings or tapered rollers. Sub-bearing. Radial bearing combinations subjected to simple radial loads, such as cylindrical roller bearings with inner and outer rings without ribs, can be used as fixed-end bearings in combination with deep groove ball bearings or four-point contact ball bearings or two-way thrust bearings. At this time, the second bearing provides bidirectional axial positioning, but must be installed with a radial spacing from the bearing housing. When the shaft is thermally expanded and the length changes, the free end bearing does not squeezing in the bearing. Axial displacement can occur inside the bearing, as well as bearing rings and housings.

Auto parts front Wheel Bearings and Hub Assembly 512452