Mitsubishi wheel hub bearing 515074

Mitsubishi wheel hub bearing 515074

Mitsubishi wheel hub bearing 515074 OE: MR455620, 3880A012, MR961910 Interchange Part number: 713619740, 515074, VKBA6914 Flange Diameter : 6.663 In. Bolt Circle Diameter : 5.503 In. Wheel Pilot Diameter : 2.64 In. Brake Pilot Diameter : 3.701 In. Flange Offset : 1.478 In. Hub Pilot Diameter :...

Mitsubishi wheel hub bearing 515074

OE: MR455620, 3880A012, MR961910

Interchange Part number: 713619740, 515074, VKBA6914

Flange Diameter : 6.663 In.

Bolt Circle Diameter : 5.503 In.

Wheel Pilot Diameter : 2.64 In.

Brake Pilot Diameter : 3.701 In.

Flange Offset : 1.478 In.

Hub Pilot Diameter : 3.385 In.

Hub Bolt Circle Diameter : 4.392 In.

Bolt Size : M12X1.5

Bolt Quantity : 6

Bolt Hole MET : M12X1.25

Bolt Hole qty : 4

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

 

Application:

MITSUBISHI  PAJERO III Canvas Top 2000-2006

MITSUBISHI  PAJERO III Canvas Top    2001-2006

MITSUBISHI  PAJERO IV               2007-

MITSUBISHI  PAJERO IV              2009-

 

Maintenance measures for bearing failure prevention

1. Bearings are sensitive and in any case require the right method and the right tool. The components of the bearing must not be damaged during storage and installation. A large pressure intrusion is required, so special tools are required. Be sure to refer to the instructions.

2. The installation should be in a clean and tidy environment, the entry of fine particles will also shorten the service life of the bearing. It is very important to maintain a clean environment when changing. Do not use a hammer to strike, be careful not to fall to the ground (or similarly improper handling). The condition of the shaft and the seat should also be checked before installation. Even slight wear can cause poor fit and cause damage.

Mitsubishi wheel hub bearing 515074.jpg