Front Wheel Hub Assembly for NISSAN MURANO

When checking the tightness of the hub bearing, firstly, the axle of the wheel at one end of the wheel of the car to be inspected is erected, and the vehicle is safely framed by means of a vehicle stool, a wooden cover, and the like.

Wheel Bearing Hub Assembly for NISSAN MURANO QUEST 513310

Front Vehicle


Application:

NISSAN MURANO

NISSAN QUEST

AUTO EXTRA/BEARING-SEALS-HUB ASSEMBLIES 513310

ONESOURCE HUB ASSEMBLIES 513310

OEM40202CA000

OEM40202CA010

OEM40202CA06C

OEM40202ZM70A


Inspection Of The Hub Bearing

(1) When checking the tightness of the hub bearing, firstly, the axle of the wheel at one end of the wheel of the car to be inspected is erected, and the vehicle is safely framed by means of a vehicle stool, a wooden cover, and the like.


(2) Turn the number of wheels to be inspected by hand to see if the rotation is stable and there is abnormal noise. If the rotation is not smooth and there is friction, the brake part is not normal; if there is no noise, the rotation is not smooth and it is loose when it is tight, indicating that the bearing part is not normal. The hub should be removed when the above abnormality occurs.

For small cars, when inspecting the hub bearings, hold the upper and lower sides of the tires with both hands, and pull the tires back and forth with both hands and repeat them many times. If it is normal, there should be no feeling of looseness and blockage; if the swing has a feeling of looseness, the wheel should be removed.


(3) Inspection of the brakes. Usually when inspecting the hub bearing, check the wheel brake device. If there is oil on the inside of the tire, it may be caused by oil leakage from the brake cylinder or brake hose. The cause should be identified and eliminated.


01(001)

02(001)

03(001)

04(001)