High quality Japanese car front wheel bearing hub 513306 for NISSAN
OE: 402023ZG1A, 40202JP11A
Interchange Part number: 051859B, BR930767, HA590236
Fitting Position: Front Axle
Fitting Position: Left
Fitting Position: Right
Inner Diameter: 31 mm
Outer diameter: 136 mm
Width: 87 mm
Quality: High level
Warranty: 12 Months
Place of Origin: China (mainland)
NISSAN MURANO CROSSCABRIOLET V6 3.5L 3498CC VIN A VQ35DE 2011-2012
NISSAN MURANO LE V6 3.5L 3498CC VIN A VQ35DE 2009-2012
NISSAN MURANO S V6 3.5L 3498CC VIN A VQ35DE 2009-2012
NISSAN MURANO SL V6 3.5L 3498CC VIN A VQ35DE 2009-2012
NISSAN MURANO SV V6 3.5L 3498CC VIN A VQ35DE 2011-2012
The clearance of the bearing in working condition, the inner ring temperature rises the most during operation, the thermal expansion is maximum, and the bearing clearance is reduced.
Bearing clearance; at the same time, due to the load, the rolling element and the raceway contact elastic deformation, so that the bearing clearance increases. Whether the bearing working clearance is larger or smaller than the installation clearance depends on the combined effect of these two factors.
When measuring the clearance of the bearing unit, place the bearing on the platform and press the bearing outer ring by hand. Be careful not to tilt the inner and outer rings, and turn the inner ring 1/2-1 turn to the left and right to make the roller stable. Then, place any of the left and right columns in the upright position. The internal clearance is measured with a feeler gauge, and the measurement position and measurement point are somewhat different depending on the outer diameter of the bearing.