Wheel Bearing Maintenance
Before disassembling the hub, prepare the wheel hub for maintenance, stop the car and set up the axle to ensure the safety of the maintenance work.
(1) Remove the decorative cover and dust cover of the hub shaft head;
(2) Remove the tire nut and tire, taking care not to hurt the thread of the tire bolt. If it is a disc brake, remove the brake and use it to remove the lock ring or lock pin.
(3) Remove the hub with a special tool;
(4) Scrape the old grease in the bearing, journal and hub cavity, clean the hub bearing and journal with a cleaning agent and wipe dry with a cloth. Finally, wipe the inner cavity of the hub with a cloth.
(5) Check the hub bearing and the bearing race, and find cracks, fatigue peeling and loose bearing rollers. Replace the bearing. If there is a pitting on the bearing race, the bearing should also be replaced.
(6) Check the matching between the inner diameter of the bearing and the journal. The matching clearance should be no more than 0.1Omm. When measuring the journal, it should be measured at the upper and lower parts of the vertical ground (the largest wear part at this place). If the fit clearance exceeds the specified limit of use, the bearing should be replaced to return it to the normal fit clearance. Do not allow burrs and pitting on the journal to narrow the gap.
Auto Hub Bearing for OPEL SIGNUM VECTRA VKBA6507
VKBA6507, R153.43, 713644270, 1603255, 93178661, 93186388, 1603295, 5343, 27525.
1. What is the Minimum Order Quantity?
We don't have MOQ for wheel bearing, 1PCS could be done.
2. How about the quality?
No worry that all of our products are 100% tested before shipments.
3. What are the guarantees of your products?
1 year or 30000KM of guarantee.
4. What are your payment methods?
Western Union, PayPal or bank T/T.
5. What are your shipment methods?
Item ordered in small quantity can be delivered by air, we work with DHL, FEDEX, TNT and UPS.
Item ordered in big quantity will be delivered by sea.