Automotive Rear Wheel Hub Bearing 4142034000 Fit For SSANGYONG

Automotive Rear Wheel Hub Bearing 4142034000 Fit For SSANGYONG

Automotive rear wheel hub bearing 4142034000 fit for SSANGYONG OE:4142034000 Interchange Part number:H10096BTA, N4700402, 9328027 Fitting Position: Rear Axle Ø: 144 mm Width: 64 mm Inner Diameter: 30 mm Number of bores: 9 Quality: High level Warranty: 12 Months Certificate: ISO/TS16949 Place of...

Automotive rear wheel hub bearing 4142034000 fit for SSANGYONG

OE:4142034000

Interchange Part number:H10096BTA, N4700402, 9328027

Fitting Position: Rear Axle

Ø: 144 mm

Width: 64 mm

Inner Diameter: 30 mm

Number of bores: 9

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

SSANGYONG  KORANDO (CK) 2.0                   2012-

SSANGYONG  KORANDO (CK) 2.0 4WD        2012-

SSANGYONG  KORANDO (CK) 2.0 e-XDi        2010-

SSANGYONG  KORANDO (CK) 2.0 e-XDi            2012-



The main purpose of the bearing cage is to separate the rolling elements to reduce the frictional heat generated by the bearings and to evenly separate the rolling elements to optimize the load distribution. The rolling elements are guided in the unloaded area of the bearing, and for the separate type of bearing, the rolling elements can be held together when one of the bearing rings is installed or removed.

A cage centered on the rolling elements allows the lubricant to easily enter the bearing. The cage that is centered on the ferrule results in higher guiding accuracy and is typically used for bearings that must withstand the high speed, high vibration or inertial forces generated by the overall motion of the bearing.


01(001)

02(001)

03(001)

04(001)