China Rear Wheel Hub 713623690 For SUZUKI

China rear wheel hub 713623690 for SUZUKI OE:43402-80J52 Interchange Part number: ADK88329, 713623690, Size: Rim: 5 -Hole Flange Ø: 140 mm Supplementary Article/Info 2: with integrated ABS sensor Quality: High level Warranty: 12 Months Certificate: ISO/TS16949 Place of Origin: China (mainland)...

China rear wheel hub 713623690 for SUZUKI

OE:43402-80J52

Interchange Part number: ADK88329, 713623690,

Size: Rim: 5 -Hole

Flange Ø: 140 mm

Supplementary Article/Info 2: with integrated ABS sensor

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

SUZUKI SX4 BASE MODEL L4 2.0L 1995CC 2007-2009

SUZUKI SX4 BASE MODEL L4 2.0L 1995CC VIN 5 J20B 2010

SUZUKI SX4 CROSSOVER L4 2.0L 1995CC VIN 5 J20B 2010-2012

SUZUKI SX4 JLX L4 2.0L 1995CC 2008

SUZUKI SX4 JLX L4 2.0L 1995CC VIN 5 J20B 2011

SUZUKI SX4 JX L4 2.0L 1995CC 2008

SUZUKI SX4 JX L4 2.0L 1995CC VIN 5 J20B 2011

SUZUKI SX4 LE L4 2.0L 1995CC VIN 5 J20B 2010-2012

SUZUKI SX4 LE ANNIVERSARY EDITION L4 2.0L 1995CC VIN 5 J20B 2011



Standard deep groove ball bearings with dust cover, available in Z and 2Z (NSK). Generally used in the condition that it is difficult to separate lubrication, the lubricating oil road is installed and the lubrication condition is inconvenient, the rust-proof and lubricating lithium-based grease which is usually injected into the bearing is 1/4~1/3 of the inner space of the bearing;

Standard grooved deep groove ball bearings have contact type seal bearings RS type (NSK called DDU type, one side seal) and 2RS type (two side seal) and non-contact type sealed bearings RZ type (NSK called VV type, one side sealed ) and 2RZ type. Its performance, grease filling, and use are basically the same as those with dust cover. The difference is that there is a large gap between the dust cover and the inner ring. The gap between the sealing lip and the inner ring of the non-contact seal is small. There is no gap between the sealing lip and the inner ring of the seal bearing, the sealing effect is good, but the friction coefficient is increased.


01(001)

02(001)

03(001)

04(001)