High Quality Auto Rear Wheel Hub 4245060070 Fit For LAND CRUISER

High Quality Auto Rear Wheel Hub 4245060070 Fit For LAND CRUISER

High Quality Auto Rear Wheel Hub 4245060070 fit for LAND CRUISER OE:4245060070, 424500C010 Interchange Part number: 9249003, N4712115, 982960 Size: Rim: 4 -Hole Supplementary Article/Info 2: with integrated ABS sensor Inner Diameter: 49 mm Width: 67 mm Quality: High level Warranty: 12 Months...

High Quality Auto Rear Wheel Hub 4245060070 fit for LAND CRUISER

OE:4245060070, 424500C010

Interchange Part number: 9249003, N4712115, 982960

Size: Rim: 4 -Hole

Supplementary Article/Info 2: with integrated ABS sensor

Inner Diameter: 49 mm

Width: 67 mm

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

LEXUS  LX (_J2_) 570                  2007-

LEXUS  LX (_J2_) 570 (URJ201_)          2007-

LEXUS  LX (_J2_) 570 (URJ201_)          2007-

TOYOTA  LAND CRUISER 200                 2008-



Repair processing method without reference main bearing hole


When there are one or more holes in the machine body, it is necessary to machine the whole spindle hole, but to ensure the coaxiality between the processed spindle hole and the spindle hole that does not need to be processed, the two gears that are farthest apart should be processed first. The spindle hole is corrected to the same axis, and then the hole to be machined is rough, the hole diameter is 264mm. After the boring, the tool diameter is adjusted to 264.8mm, and it is moved into the spindle hole that is not required to be machined adjacent to the hole, and the tool tip enters the hole. At the mouth of 1mm ~ 2mm, use a 0.1mm feeler gauge to check the gap between the feeler and the hole wall. When the gaps in the up, down, left and right directions are the same, the tool will be adjusted to the same diameter as the hole, and the inner wall of the hole will be coated with chalk. Test the hole (the test cutting distance is in the range of 1mm to 2mm, so as not to damage the hole size). The tool exits the inspection mark on the chalk mark, and there may be a cut on the hole wall of the workpiece, such as uneven cut, fine adjustment After the workpiece zero point to the even mark, the workpiece zero point is determined, and the required hole can be processed, and the position accuracy of the hole is ensured. This method requires the repeatability of the machine to be within the accuracy allowed by the workpiece.


01(001)

02(001)

03(001)

04(001)

Hot Tags: high quality auto rear wheel hub 4245060070 fit for land cruiser, China, manufacturers, suppliers, factory, wholesale, cheap, Wheel Hub Assembly Front For HYUNDAI ENTOURAGE, TAY100050 Wheel Hub Assembly For Land Over, Wheel Hub Assembly 515032, Dodge Wheel Hub Assembly Bearing, Wheel Bearing 713618970, N235150 Drive Shaft Center Support Bearing