Hot Selling Rear Wheel Hub VKBA7690 For CAMRY

Hot selling rear wheel hub VKBA7690 for CAMRY OE:4245006130, 4245033030, 4245006160 Interchange Part number: VKBA7690, 9400343 Size:Thread Size: M12×1.5 Fitting Position: Rear Axle Right Supplementary Article/Info 2: with integrated ABS sensor Outer diameter: 152 mm Mounting Bores Distance:...

Hot selling rear wheel hub VKBA7690 for CAMRY

OE:4245006130, 4245033030, 4245006160

Interchange Part number: VKBA7690, 9400343

Size:Thread Size: M12×1.5

Fitting Position: Rear Axle Right

Supplementary Article/Info 2: with integrated ABS sensor

Outer diameter: 152 mm

Mounting Bores Distance: 114.3 mm

Rim: 5 -Hole

Quality: High level

Warranty: 12 Months

Certificate: ISO/TS16949

Place of Origin: China (mainland)

Application:

TOYOTA CAMRY Saloon (_V5_) 2.5 (ASV50_) 2011-

TOYOTA CAMRY Saloon (_V5_) 2.5 Hybrid (AVV50_) 2011-


Standard deep groove ball bearings with dust cover, available in Z and 2Z (NSK). Generally used in the condition that it is difficult to separate lubrication, the lubricating oil road is installed and the lubrication condition is inconvenient, the rust-proof and lubricating lithium-based grease which is usually injected into the bearing is 1/4~1/3 of the inner space of the bearing;

Standard grooved deep groove ball bearings have contact type seal bearings RS type (NSK called DDU type, one side seal) and 2RS type (two side seal) and non-contact type sealed bearings RZ type (NSK called VV type, one side sealed ) and 2RZ type. Its performance, grease filling, and use are basically the same as those with dust cover. The difference is that there is a large gap between the dust cover and the inner ring. The gap between the sealing lip and the inner ring of the non-contact seal is small. There is no gap between the sealing lip and the inner ring of the seal bearing, the sealing effect is good, but the friction coefficient is increased.


01(001)

02(001)

03(001)

04(001)