Rear Wheel Hub Assembly for TOYOTA RAV 4

When the bearing is removed and inspected, the appearance record is first recorded by photography. Also, verify the amount of lubricant remaining and sample the lubricant before cleaning the bearings.

Rear Wheel Hub Bearing for TOYOTA RAV 4 512338


Rear Vehicle

Flange Diameter: 5.983 In.

Bolt Circle Diameter: 4.494 In.

Wheel Pilot Diameter: 2.36 In.

Brake Pilot Diameter: 3.201 In.

Flange Offset: 2.717 In.

Hub Pilot Diameter: 3.302 In.

Hub Bolt Circle Diameter: 4.266 In.

Bolt Size: M12X1.5

Bolt Quantity: 5

Bolt Hole MET: 0.417 In.

Bolt Hole qty: 10.604 In.

ABS Sensor: N

Number of Splines: 26


Application:

TOYOTA RAV 4 Mk


Maintenance

Cleaning

When the bearing is removed and inspected, the appearance record is first recorded by photography. Also, verify the amount of lubricant remaining and sample the lubricant before cleaning the bearings.

a. The cleaning of the bearing is carried out by rough washing and fine washing, and a metal mesh frame can be placed on the bottom of the used container.


b. When rough washing, remove the grease or adhesive with a brush or the like in the oil. At this time, if the bearing is rotated in the oil, be careful that the rolling surface will be damaged by foreign matter or the like.


c. When washing finely, slowly rotate the bearing in the oil and carry out it carefully.

The cleaning agent generally used is a neutral non-aqueous diesel oil or kerosene, and a warm alkali liquid or the like is sometimes used as needed. Regardless of which cleaning agent is used, it is often filtered and kept clean.

Immediately after cleaning, apply anti-rust oil or anti-rust grease to the bearing.


01(001)

02(001)

03(001)

04(001)